Thursday, June 27, 2013

June is Bustin' Out With Flowers Blog Hop

Flowers are in bloom as the warm summer air dances lightly across the yards and fields and this blog hop is all about the flowers.  

I'm your hostess for this hop and if you make the rounds and give some good vibes on all the crafter's blogs, I will add you to a drawing for a $10 gift card to Michaels and whatever other goodies I have to stick in my padded envelope. It's a small group of participants so it won't take you long to be wowed and to leave a comment for each one.

Now flower power away




I'm not going to lie, I think this is one of my most favorite cards ever. I just took a pre-folded A2 card and embossed one side with my Cuddlebug. Then I slightly ran brown chalk ink over the raised area so you could see the music notes. The cut outs are from Graphic 45. I made the flowers using the flower shoppe cartridge from Provocraft and then I added half pearls and charms from Miriam's Crafting Supplies and twine from My Life in Arts N Crafts. A simple card but I really like it.


Thank you for stopping to smell the flowers and down the path to Camille.










Final Line Up

Jearise - http://lorbysworld.blogspot.com
Camille - http://shortonideasaz.blogspot.com/
Jamie - http://craftygirl21.blogspot.com/
Maria - http://asimplefive.blogspot.com/
Edwina- http://edwinascreations.blogspot.com/ 
Mayra - http://themaddscrapper.blogspot.com/
Lissa Marie ~ www.somanycrafts.com
Lynne Kirsch ~ http://slasewcraftiness.blogspot.com/
Anita Cannon  ~ http://www.anitaandbugs.blogspot.com  


I entered the Pearls Challenge at Divas by Design.

Wednesday, June 26, 2013

Vintage Decorations from SVG Attic

I love decorating for all the holidays and that includes the 4th of July. The newest set Vintage Nation and the Vintage Patriotic Cupcake Wrapper  from SVG Attic were the perfect sets to combine to get my decorating under way. 
This is the star and rosettes from the Vintage Nation set and the middle adornments are from the Vintage Patriotic Cupcake Wrapper set.

Both the box and the rocket lantern are from the Vintage Nation set. I had fun adding the wire and stars that come out of the middle of the rocket and the rocket has a special surprise - it holds a tea light so it glows at night.
I used Tim Holz Distress Christmas stack for this set. One side of the paper has Christmas designs but the other is distressed solid colors that work perfectly for these decorations.

Check out these two sets and all the wonderful cutting files at SVG Attic and right now there is a sale going on where you can get 35% off your order by using the code: FREE at checkout.

Have a safe and happy 4th of July!

I have entered this set of decorations in the Scrap Happens: July/Summertime Challenge

Tuesday, June 25, 2013

Freedom Rocks Blog Hop

for My Life in Arts N Crafts.

This is my last blog hop for My Life in Arts N Crafts. Jessi, the owner, is venturing into new territory so she is putting blog hops and design teams on hold. We've been together from the start so this is bittersweet for me but I am so proud of how far she has come since meeting her and joining her team. I have never understood how that young lady has handled it all this past year with work, school, job and her own business but she's a little firecrackers so this is the perfect blog hop to end on for the design team.

Her business will continue so you will still be able to get your ribbon, twine and jute from her store - My Life in Arts N Crafts Store.

My project is a take I saw on someone else's project a few weeks back. I thought it was so neat of an idea that I had to try it.

The rosette is a cutting file from SVG Attic and their Vintage Nation set. I misted the paper with Perfect Pearls Mist - Forever Red and then used the red and blue twines from My Life in Arts N Crafts Store to wrap around each section.

I love how easy this was to do but yet how pretty it is and so versatile too.
The paper on the other side has a Christmas design so if I had only used the red twine, I could have also used this again at Christmas time. How versatile it that!?

Thanks for stopping by today and seeing all our 4th of July creations and now onto Robin's Blog.

I have entered this in SCRAP HAPPENS: July/Summertime Challenge 

Friday, June 21, 2013

Super Hero Stuff

The Stamping Chef has a wonderful new set of 6 x 6 digital papers and guess the theme? Yup, you're right - Super Hero. These papers are so bright and fun to work with that I just had to put something together for this challenge.

This was a quick and almost simple digital scrapbook book page that can be scaled down to make a 4 x  4 or a 5 x 5 birthday card. I plan on using it this weekend for a birthday party my son is invited to.

The background is from the Super Hero Stuff pack and so it the border which is actually a 6 x 6 paper from the pack that I made narrow to use as a border. Superman is a free digital picture that I found on line and why I used the words "almost simple" is because I had to make the background transparent and I was having a dickens of a time doing so but finally did and this is what I came up when it was all put together. I love it! Superman pops off the page even though he's not a sticker and the skyscraper background is just perfect!

SuperHere Stuff
So hurry on over to The Stamping Chef to check out this new set and to also see all her other wonderful creations.

Wednesday, June 19, 2013

Metal Embellishments bring a card to life...

I have to be honest when Miriam sent me these metal embellishments and told me to use them on my projects for this month's challenge at Miriam's Crafting Supplies, I was thinking that there was no way I could use these. They are beautiful but I just don't use things like these in my crafting. Then I got them in the mail and look what happened...
I made this card a few months back and thought it was pretty enough but I kept thinking it needed something else and was just too plain. When I got the metal embellishments from Miriam's Crafting Supplies I thought why not give them a try and WOW, they really added that extra touch I was looking for.

Here is a close up of the metal embellishment on the corner. Isn't it beautiful?
Card Recipe:
Bronze metallic paper put through my Cuddlebug to dry emboss.
Dark Green Jute from My Life in Arts N Crafts 
Butterfly sticker from my stash
Metal Corner Embellishments and Half Pearls from Miriam's Crafting Supplies
All adhered to a A2 card

These metal embellishments are so versatile on projects from cards to ornaments to jewelry. Click on any of the words to see what I mean.

Have a great day!!!

Tuesday, June 18, 2013

Stars and Stripes Challenge

There is a new challenge at The Stamping Chef going on now and the theme is Stars and Stripes. Tamara has so many cute designs to choose from that I'm sure you will find one that you can add a few stars and stripes to. 

Here is my inspiration for the challenge.

I just love the way this turned out even if I forgot the stripes. Oops. I cute the milkshake off the stamp but kept the platter and glued the star to it. On the inside of the card it says, "LIKE THE STAR YOU ARE."

My cute little digital stamp is called Milkshake Anyone?

Head on over to the The Stamping Chef challenge to see the other design teams' projects and to join in the fun!

The stars are from Miriam's Crafting Supplies.

A box and jute

I've got a cute little box to show off for My Life In Arts N Crafts and the jute isn't used in the traditional way of tying it up. Just take a look.
I used the jute from the Christmas Jute Pack for the body of my butterfly. I just love it! It's a fake button sticker and I just wound the jute through the holes. Here is a close up.
I added some glitter Stickles to the butterfly wings for a little sparkle too and the box is from a cutting file from SVG Attic's.

 Thanks for stopping by today and check out all the colored jute and twine plus ribbon galore at My Life In Arts N Crafts.

Thursday, June 13, 2013

It's Gradutaion Time with SVG Attic

June is the month for graduation and graduation parties and SVG Attic has so quick, cute and easy graduation cards to make.

I had a graduation to go to this past week and whipped up this card on the fly. I used the school colors and since it was for a boy, I decided to not add all the extra bling. I love the clean lines of this STEP CARD.

I used the STEP CARD svg cutting file for the card base. The year, graduation caps, diploma and "Way to Go" all come from the HATS OFF svg cutting file.

Check out the files I used here today and all the other wonderful files at SVG Attic.

Wednesday, June 12, 2013

Masculine Card and Unique Technique

Today I made another Father's Day card but this time I used a fun and interesting technique. I'll start by showing my card I made and then I have included a tutorial as to how I did it. I hope you like it!

Here is a picture of three of the four things you'll need to make this card.
Tim Holtz Distress Ink in Shaded Lilac
Tim Holtz embossing folder for Sizzix
Core'dinations paper
Perfect Pearls Mist

1. Sand and crumple the paper and then open it back up and lay as flat as possible
2. Gently run ink pad over paper so it just touches raised crinkled parts.
3. Spray paper with Perfect Pearls Mist.
4. Put paper in embossing folder and run through your Cuttlebug machine.

5. Take a sponge daubber and gently rub ink over just the embossed image.
And that's it!
I was going to have this as a birthday card but needed another Father's Day card and thought it would be perfect. I sanded and inked and stamped the sentiment and added some Doodle Twine. I thought the white stood out too much so I rubbed my twine on my ink pad to give it a soft shade of blue where the white is. Finally, I assembled the card with my ATG tape gun.

Thanks for stopping by today.



Monday, June 10, 2013

Vacation Challenge at Scrappy Frogs Challenge

Our  new challenge here at Scrappy Frogs is all about Summer Vacation.  Do you have vacation plans this summer or do you have memories from a past vacation you want to showcase?  If so, come play along with us at Scrappy Frogs Challenge.

I love to travel and have found so many beautiful places in the United States alone and there are so many more places in this beautiful country to still visit that I will probably just drive and fly and visit places here for the rest of my life but if I could hop a plane and fly across the ocean for a vacation I would definitely head to France. Oh La La...

 Side View
The beautiful paper I used is from Tsunami Rose printable digital paper.

This challenge will run throughout the month of June so hurry on over and get more inspiration from the Scrappy Frogs Challenge design team and then link up!

Friday, June 7, 2013

Beautiful Christmas Ornaments

I know it's only June but that does only leave six more months before Christmas time again so it's never too early to get ready by making some simple yet beautiful Christmas ornaments.

Here is an ornament I just made using one of the beautiful metal embellishments from Miriam's Crafting Supplies.
-----------------------------------------------


Here is the tutorial on how I made it.

I found this cardboard ornament in the clearance bin at Michaels. I head to the clearance bins now before checking out the sales. I also picked out a metal embellishment I liked from all the pretty metal embellishments that Miriam's Crafting Supplies carries.
1) Remove the sales tag from the back. The reason being, is that sometimes the tag is so glossy that paper doesn't want to adhere to it. I have found that using the spatula for die cutting mats is helpful.
If you take some of the layers of the cardboard off, don't worry. You'll be covering it and won't notice when you're finished.
2) Trace around the outside of the shape but leave a little excess to work with. This will be trimmed off after the paper is glued down.

 I picked paper from the

3) Cut around your circle and use your embossing machine and the embossing folder of your choice to add a raised design to the paper.
4) Use Mod Podge to adhere the paper to the ornament and us a utility knife to trim off any excess.
5) Lightly touch the raised embossed design with your ink pad to give color to the raised print. I used a pigment ink in pink. Coat with Mod Podge to seal the ink so it wouldn't smear.
I tried different metal embellishments to see which one I would like best and I went with this one. All the metal embellishments came from Miriam's Crafting Supplies Store and anyone would have been beautiful.

 6) Add Stickles glitter glue to the very outside of the circle and then glue the picture in the middle. I cut a snowflake from the winter pad. There was already glitter on the snowflake. Add Glossy Accents to the snowflake for a nicer look.
7) While everything on the metal embellishment is drying, paint the outside edge of the ornament in gold acrylic paint.

8) Before adding the embellishment take the ornament outside and spray all of it with a clear finish. I used Krylon Low Odar Clear Finish. This will help your ornament last for years to come.
 9) Finally, add the embellishment using a low heat glue gun.

Thanks for stopping by today and please join us at Miriam's Crafting Supplies Blog Challenge. This month's theme is metal which can be one of the beautiful embellishments from above or a metal charm or anything else as long as it is metal or has metal.


Wednesday, June 5, 2013

For Dad Challenge

There is a new challenge over at The Stamping Chef blog entitled: Dad Challenge

This challenge will give you lots of inspiration using the digital stamps from The Stamping Chef Store.

Here is my inspiration for you...

I used the digital stamp crown stamp for the card and colored it using my alcohol markers. I added glimmer mist to it and Stickles. The background paper was in my paper trash pile as I call it. It's the pile where the half used pieces of papers go since you never want to throw any paper away until it's so small you can barely see it. You never know when you may need a piece of paper the size of a dine.

I used my CuddleBug for the word frame and colored chalk ink to add the purple and on the inside of the card is says, well, you guessed it. "Dad"

Check out the cards the other design team members made for some Father's Day inspiration and join the challenge at The Stamping Chef Challenge!

I can't wait to see your creations.

Tuesday, June 4, 2013

Watermelon box with jute

Welcome to my blog...


Today I made a watermelon box and had fun adding some flowers and red jute from My Life in Arts N Craft Store to it. 

I could have left the box plain because it's that cute already but the flowers and jute add that extra touch. Also, besides adding that extra touch the jute keeps the box closed tightly so the goodies inside don't spill out. Now that's functionality!

Thanks for stopping by today and here is what I used to make this sweet box.

Red Jute from My Life in Arts N Crafts Store
SVG Attic's Perfect Picnic
store bought flowers sprayed with glimmer mist
patterned embossing folders from Tim Holtz

Graphic 45 Trinket Box for Cutter's Creek

Today I am showing off a paper mache ticket box I decorated using the Le Cirque Double-Sided Paper Pad from Graphic 45. I discovered that Mod Podge works perfecting for attaching the paper and bringing out bright colors. Please contact Kim if you would like to order some Mod Podge.

Here are the directions on how I decorated this box.

First, I measured the sides of the boxes height and then I cut out the strip and played with wrapping it around the box to show different scenes. I decided I liked the elephants on one side and words on the other so I brought the paper together in the middle of the heart and made sure it overlapped some before cutting.  It's important to have it over lap in case you cut it shorter than you thought you were.

Once I had the paper Mod Podged on, I went back and trimmed it down to the edge of the top of the box using my utility knife and scissors.

Then on to the top....

I centered my elephant in the middle of the box and trimmed around the outside edge using my utility knife and scissors and then I Mod Podged the paper on.

I did the same thing with the trim for the top sides that I did with the bottom sides of the box.

I then went back and inked all the edges and added a touch of ink to the paper on the top and sides as well using the Tim Holtz Distress Ink Pad-Tea Dye.

I added some of the Tattered Angle's glimmer mist and a flower I made using the Cricut Cartridge Flower Shoppe. I attached the flower using Scotch quick dry adhesive.

There you have it in a nutshell, an easy project that is fun to do and doesn't take a lot of time. I even let my 8 year old decorate her own box using my paper scraps.



Have a great day! Jearise